Dell EMC PowerMax Series Site Planning Manual page 67

customer-supplied cable
Figure 33. Connecting AC power, single-phase, PowerMax 8000
• For three-phase power: Connect customer-supplied PDU power cables to the storage bay by connecting to the bay's AC input line
cords for power zone A and power zone B as shown below.
customer-supplied cable
Figure 34. Connecting AC power, three-phase, PowerMax 2000, two dual-engine systems in a rack
Zone B
AC input
line cord B
P1 P3 P5
Mating connector or
Customer's PDU 1
Zone B
AC input
line cord B
P1 P2
Mating connector or
Customer's PDU 1
Rear view
System bay
Cable connectors are shown
as they exit the bottom rear
of the bay.
P3 and P5 used
depending on
configuration
P1 P3 P5
Customer's PDU 2
Rear view
System bay
Cable connectors are shown
as they exit the bottom rear
of the bay.
Lower System: P1
P1 P2
Upper System: P2
Customer's PDU 2
Best Practices for AC Power Connections
Zone A
AC input
line cord A
Mating connector or
customer-supplied cable
Zone A
AC input
line cord A
Mating connector or
customer-supplied cable
67