Principal Safety Standards - Hobart Welders GMAW Manual

5. Principal Safety Standards

Safety in Welding, Cutting, and Allied Processes, ANSI Standard Z49.1,
from Global Engineering Documents (phone: 1-877-413-5184, website:
www.global.ihs.com).
Safe Practices for the Preparation of Containers and Piping for Welding and
Cutting, American Welding Society Standard AWS F4.1, from Global Engi-
neering Documents (phone: 1-877-413-5184,
website: www.global.ihs.com).
Safe Handling of Compressed Gases in Cylinders, CGA Pamphlet P-1,
from Compressed Gas Association, 4221 Walney Road, 5th Floor, Chantil-
ly, VA 20151 (phone: 703-788-2700, website:www.cganet.com).
Safety in Welding, Cutting, and Allied Processes, CSA Standard W117.2,
from Canadian Standards Association, Standards Sales, 5060 Spectrum
Way, Suite 100, Ontario, Canada L4W 5NS (phone: 800-463-6727,
website: www.csa-international.org).
Safe Practice For Occupational And Educational Eye And Face Protection,
ANSI Standard Z87.1, from American National Standards Institute, 25 West
43rd Street, New York, NY 10036 (phone: 212-642-4900,
website: www.ansi.org).
Standard for Fire Prevention During Welding, Cutting, and Other Hot Work,
NFPA Standard 51B, from National Fire Protection Association, Quincy, MA
02269 (phone: 1-800-344-3555, website: www.nfpa.org.
OSHA, Occupational Safety and Health Standards for General Industry,
Title 29, Code of Federal Regulations (CFR), Part 1910, Subpart Q, and
Part 1926, Subpart J, from U.S. Government Printing Office, Superinten-
dent of Documents, P.O. Box 371954, Pittsburgh, PA 15250-7954 (phone:
1-866-512-1800) (there are 10 OSHA Regional Offices—phone for Region
5, Chicago, is 312-353-2220, website: www.osha.gov).
Applications Manual for the Revised NIOSH Lifting Equation, The National
Institute for Occupational Safety and Health (NIOSH), 1600 Clifton Rd, At-
lanta, GA 30333 (phone: 1-800-232-4636, website: www.cdc.gov/NIOSH).
OM-249 818 Page 6