Table of Contents
Advertisement
Before first Use
Unpack the wood burning station and check it for any damage in transit.
Dispose of packaging materials or store it out of reach of children. Plastic bags
etc. may become a deadly toy for children.
First Steps
Place the burning station
on a level, solid surface.
Now set the burning iron
down
on
stand and plug the male
plug (7) into the socket (3)
of the burning station.
Operation
Set the temperature control dial (4) to the desired temperature (450 °C to
750 °C).
Flip the ON/OFF switch (1) to the lower "ON" position. After the burning tip
has heated up you can begin burning.
The control LED (2) indicates
whether the burning station is
turned on.
Depending on the task, use
always a temperature high
enough to blacken the wood
surface in a satisfactory way.
Please keep in mind that
excessive temperatures may
ignite the wood you are working
on.
Suitable pyrography burning tips for the unit can
be ordered from Westfalia under the article no.
66 08 11.
the
included
Operation
6
Advertisement
Table of Contents
