Advertisement
BAY WINDOW GAZEBO ASSEMBLY INSTRUCTION
Fig. 2-1
E
G1
G2
Fig. 2-4
G1
C2
A
B1
Step: 2
Fig. 2-1: Screw Center Hook (J) into the Larger Roof Connector (E) and secure properly.
Fig. 2-2: Connect Top Roof Supporter (F) with Larger Roof Connector (E). Attention here: the end of
Label "→F" affixed on Larger Roof Connector (E) is used to assemble F.
Fig. 2-3 & 2-4: A ladder is needed for this step--- When placing Larger Roof Connector (E), please
make sure that, the middle connecting end of E labeled with "→H2" should be directed to Long Bar
(C1); while the part labeled with the logo "→H1" be directed to Short Bar (C2). Connect one end of
the Corner Supporting Bar (G1&G2) and Top Roof Supporter (F), and fix the other end of (G1&G2)
with Big Screen (A).
Fig. 2- 5 & 2-6: Connect one end of Side Supporting Bar (Long) (H1) and Larger Roof Connector (E),
and secure the other end of (H1) to the Short Bar (C2) with Screws (BB) and Washers (CC).
Fig. 2-7: Do the same for Side Supporting Bar (short) (H2) and Larger Roof Connector (E), then fix
them with Long Bar (C1) using (BB) and (CC), to complete top frame assembly.
F
J
H1
G1
G2
C2
A
B2
B1
G2
C1
B2
Fig. 2-2
F
E
H2
C1
C1
E
H1
Fig. 2-5
BB
CC
H1
Fig. 2-6
C2
Fig. 2-3
F
G1
G2
Fig. 2
G1
G2
A
B1
BB
H2
CC
C1
Fig. 2-7
P 5
Advertisement
