Thank you for your purchase Thank you for your purchase We are pleased that you have chosen Sears for your outdoor furniture purchase We hope that you enjoy the unmatched quality comfort and style of your new patio set Every piece is meticulously considered all the way down to the smallest details exclusively for you by our world class design team We know you have a choice when it comes to your patio furniture needs so from our team to yours thank you for letting us be a part...
Safety Information SET UP YOUR FURNITURE PROPERLY Ensure that all parts are assembled properly and fully tightened as per the instructions When placing in the desired location ensure that all legs are resting on the same surface. You may adjust the leg levelers as needed to ensure the item stands securely on your surface.
Warranty Cushions are covered for a period of one (1) year against defects in material or workmanship. Frames are warranted to be free from defects in material or workmanship for a period of one (1) year Exclusions: items used for commercial, contract, or other nonresidential purposes or items damaged due to acts of nature vandalism misuse or improper assembly is not covered Discoloration and fading of the finish or fabrics as a result of chemicals or spills are not covered...
Pre-Assembly PLANNING ASSEMBLY To prevent damage place all parts on a soft surface during assembly Remove all protective caps before beginning assembly It takes about 20 minutes for two people to complete all the assembly OBSERVE WEIGHT LIMITS The recommended weight limits for the following products are listed below Table 220 lbs CAUTION: If you overload your furniture, injuries can occur.
Pre-Assembly (continued) Package Contents DESCRIPTION PART QUANTITY BACK REST SEAT LEFT LEG RIGHT LEG LEFT ARM RIGHT ARM WOOD SLAT WOOD HINGE Safety Information 1 EVERY BOLT NEEDS TO BE USED. 2 DO NOT FULLY TIGHTEN BOLTS UNTIL INDICATED IN STEP 2...
Assembly Instructions Attaching the legs and wood slat ATTACH THE LEGS ”C” AND “D”, TO THE ASSEMBLY SEAT “ B ”, FASTEN TWO BOLT “AA”, WASHER “EE”, WASHER PLASTIC “GG”, WASHER “EE” AND LOCK NUT “DD”.TIGHTEN HALF THE WAY USING ALLEN WRENCH “JJ”. AND WRENCH “II”.
Page 8
Assembly Instructions Attaching the wood hinge and back rest ATTACH THE WOOD HINGE ”H”, TO THE ASSEMBLY SEAT “ B ”, FASTEN TWO BOLT “AA”, WASHER “EE”, WASHER PLASTIC “GG”, WASHER “EE” AND LOCK NUT “DD”. TIGHTEN HALF THE WAY USING ALLEN WRENCH “JJ”. WRENCH “II”.
Page 9
Assembly Instructions Attaching the arm ATTACH THE ARM ”E,F”, TO THE LEFT LEG “ C ”, FASTEN TWO BOLT “AA”, WASHER “EE”, WASHER PLASTIC “FF”, WASHER “EE” AND LOCK NUT “DD”. TIGHTEN HALF THE WAY USING ALLEN WRENCH “JJ”. WRENCH “II”. ATTACH THE ARM “E,F”, TO THE BACK REST “A”, FASTEN TWO BOLT “BB”, WASHER “EE”, AND WASHER PLASTIC “GG”, TIGHTEN HALF THE WAY USING ALLEN WRENCH “JJ”.
Page 10
Assembly Instructions LIFT UP THE BACKREST AND PUSH THE BOTTOM OF THE BACK BACKWARD...
Customer Service HOME OFFICE: PT. INTERTREND UTAMA JL. Industri No.28 Buduran – Sidoarjo Phone : 031-8949491-2, 031-8928376 Fax : 031-8927377 Email: marketing3.intertrend@iiI.co.id...
Page 12
Please refer to part numbers when reordering For questions or comments about product: Email: marketing3.intertrend@iiI.co.id Made in / Hech en INDONESIA Ditributed by sears, Roebuck and co., Hoffman Estates, IL 60179 See our extensive assortment of outdoor living products on-line at www sears com and www.kmart com...
Need help?
Do you have a question about the Adirondack M32923 and is the answer not in the manual?
Questions and answers