GE Grid Solutions
Grid Automation
5. ELECTRICAL RECOMMENDATIONS
a. The distance of the cable between the GCP and the relay must be below 6.6ft (2m):
i. If direct connection is done between the relay and the display, 1.5ft (0.5m), 3ft (1m)
or 6.6ft (2m) cables can be used.
ii. If Control Panel Switch (CPS) is used between the displays and the MM300 relay,
both cables in total cannot exceed 6.6ft (2m).
Avda. Pinoa, 10
48170 Zamudio
SPAIN
T +34 94 485 88 00
Fig. 22 Direct connection.
Fig.23 Connection of the CPS.
Page 18 of 15