Please Read Before Starting; Safety Guidelines - Basher NITRO CIRCUS Instruction Manual

BEFORE YOU RUN YOUR CAR
Required equipement for operation
1. Tools required for building and maintenance:
Hobby knife
Hobby scissors
Hex wrench
IMPORTANT!!!
Check all the screws are tight before using the car!
Check all the screws are still tight after every battery
pack used in the car!
RECOMMENDED
Use thread lock on all scews that work loose.

PLEASE READ BEFORE STARTING!

Thank you for selecting our racing product ! This vehicle is designed to be fun to drive and uses
good quality parts for durability and performance. The instruction manual you are reading was
designed to be easy to follow yet thorough in its explanations. We want you to enjoy driving your
new R/C car. Well, before you throw down this manual and unleash your new vehicle, please
continue reading for just a few short minutes.

SAFETY GUIDELINES

The vehicle is not intended for use by children without direct supervision of a responsible,
knowledgeable adult. We shall not be liable for any loss or damages, whether direct or indirect
special, incidental, or consequential, arising from the use, misuse, or abuse of this product and/or
any product or accessory required to operate this product.
Precision ruler or caliper
Philips screwdriver
Cross wrench
1
Needle nose pliers
Wire cutters
Thread locking compound
CA glue & rubber cement