Gaskets; Glass; Troubleshooting - Invicta ANTAYA Owner's Manual

extremely hot fire, which may damage the chimney or
even destroy the house. When burning wood, inspect
the chimney connector and chimney at least once
every two months during the heating season to
determine if there is a creosote buildup.
If a creosote build-up occurs, inspect the stovepipe
connector and chimney more often, at least monthly
during the heating season to monitor the accumulation.
If a creosote residue greater that 1/4" (6 mm)
accumulates, remove it to reduce the risk of a chimney
fire.
P
REVENTION
Burn the stove with the door slightly crack for 15 - 20
minutes daily to burn out creosote deposits from within
the stove and the venting system.
After reloading with wood, burn the stove with the door
slightly crack for 15 to 20 minutes. This manner of
operation ensures early engagement of the secondary
combustion system that minimizes creosote buildup in
the chimney.
If your glass always remains dirty, your wood is wet;
therefore, there is a higher risk of creosote buildup.
Inspect the venting system at the stove connection and
at the chimney top. Cooler surfaces tend to build
creosote deposits faster, so it is important to check the
chimney at the top (where it is coolest) as well as from
the bottom near the stove.
Remove accumulated creosote with a cleaning brush
specifically designed for the type of chimney in use. We
recommend you use a certified chimney sweep to
perform this service. Contact your dealer for the name
of a certified chimney sweep in your area (your dealer
may be a certified sweep!).
We recommend that before each heating season you
have the entire system professionally inspected,
cleaned and repaired, if necessary.

GASKETS

Replace door gasket material every two to three
seasons, or whenever it becomes deteriorated or
loose, depending on stove use. If the door seal leaks,
a new gasket will ensure a tight seal and improve stove
performance.
We recommend you only use INVICTA replacement
gaskets when you need to replace your door gasket.
Contact your dealer for a gasket kit that includes
instructions, and the gasket for your stove.
Energy Distribution 2015
C
LEANING

GLASS

The glass used in our stoves is actually not plain
glass, but a tough, clear ceramic material capable
of operating at temperatures up to 2300° F. Do not
operate the stove with a broken door glass. Do not
abuse the front door by striking or slamming.
When necessary, clean the glass. For the inside
surface of the glass, we recommend using a damp
paper towel dipped in gray ash. Rub the inside of
the glass with a circular motion. When all the
deposits are removed, clean up with window
cleaner or with commercial stove glass cleaners,
which are available from your local dealer. Use this
type of cleaner for the outside surface as well.
Never attempt to clean the glass while the fire is
burning or while the glass is hot. Remove deposits
by following the instructions provided with the
cleaner. Wipe the cleaner off with a soft cloth, or
black & white newsprint.
Important: scratching or etching the glass
will weaken the integrity of the glass. Do not
use a razor blade, steel wool, or any other
abrasive material to clean the glass. Use a
cleaner specifically
woodstoves only.
The front door glass is a ceramic, thermal shock
resistant glass, made specifically for use in
woodstoves. Do not use any replacement glass
other than the ceramic glass manufactured and
supplied for use in this woodstove. Replacement
glass is available through your local dealer.
Replace the door glass immediately if broken or
chipped. Contact your local dealer for replacement
glass. The glass kit includes instructions and
everything needed for the repair. If you replace the
glass yourself, wear work gloves and safety
glasses.
T
ROUBLESHOOTING
C I
OMMON SSUES
Virtually all woodstove operators experience basic
common problems at one time or another. Most are
correctable and generally require only a minor
adjustment of the stove, installation, or operating
technique. In cases where weather conditions
24
manufactured for