Download Print this page
Dancing Wings Hobby 1.6M Fieseler Fi 156 Storch Instruction Manual

Dancing Wings Hobby 1.6M Fieseler Fi 156 Storch Instruction Manual

Balsawood airplane

Advertisement

Quick Links

注意事项
SAFETY PRECAUTIONS
这个产品不是玩具,而是一个复杂的具有难度的飞行器。您和您身边人的安全取决于您如何操作它,您需要了解相关知识,并谨慎操作。禁止
没有成人陪伴的儿童独自操作该设备。不适合14岁以下人群使用。再次强调,这不是一个玩具。
This product should not be considered a toy, but rather a complicated and sophisticated flying model. Your safety depends
on how you use and fly it, If not correctly operated, could cause injury to you or your family members. Children must be
accompanied by an adult at all times if operating this product. Not suitable for children under the age of 14. THIS IS NOT A
TOY.
● 不要在机场,军事基地,居民区或其他任何受限制的地方飞行。
● Do not fly around some restricted location like airports, military bases, residential areas, etc.
● 您需要对发射机进行距离检查,以确保没有收到任何干扰。
● You will need to range check the transmitter to be sure you are not experiencing any interference.
● 始终保持先打开发射机后打开接收机,先关闭接收机后关闭发射机的步骤。
● Always turn on the receiver last after turning on the transmitter and shut off the receiver first before turning off the transmitter.
● 如果您是初学者,建议您在有经验玩家的协助下调试和飞行。
● If you are only a beginner to the radio control model flying, do not attempt to fly your model without any assistance or advice from
advanced expert fliers.
● 请将相关物品放置在孩子们够不到的地方
● Keep relevant items out of reach of children.
● 这个设备的设计已经超过我们正常使用所需要刚性要求,但若您需要以超出我们推荐的动力飞行时,请合理控制动作幅度并适当增加机体强度。
● This product has been flight tested to meet or exceed our rigid performance and reliability standards in normal use,if you plan to perform
any high-stress flying, you are solely responsible for taking any and all necessary steps to control movement range and reinforce the body
strength.
● 您的设备中可能包括一些玻纤和碳纤雕刻的部件,这些纤维部件所带的粉尘可能会引起眼睛,皮肤的不适,请您在需要的时候带上护目镜或者防尘服。
● This product may include some fiberglass and carbon-fiber reinforced plastic parts,which may cause eye and skin discomfort,pls wear the
goggles or dust-proof clothes when needed.
● 因航空运输安全管制,您收到的产品可能没有清单中出现过的胶水,请您理解无法发送胶水给您的原因。您可以在当地文具店很方便的购买到您所需要
的胶水。
● Due to air traffic safety control, the products you receive may not have the glue that appears in the list. Please understand and purchase the
glue you need at your local stationery store.
http://www.dwhobby.com/
Balsawood Airplane
历史背景
Historical Background
Fi-156于1936年由Gerhard Fieseler博士设计为侦察,联络和空中救护飞机。这架飞机有着独特的起落架,从支柱和窗户向外伸出,它的起落
架垂下,看起来非常像一只长腿的大鸟,所以它被赋予了绰号"Storch"(德语中的鹳)。
几乎没有任何关于Storch的简化。这是一架专门建造的短距离起飞和降落(STOL)飞机,在逆风时,可以在不到200英尺的高空飞行,当它以
低速着陆与强逆风相结合时,Storch几乎可以垂直降落,有时看起来像向后飞。
The Fi-156 was created as a reconnaissance, liaison and air-ambulance aircraft in 1936 by Dr. Gerhard Fieseler. This unique
airplane's legs, struts and windows stuck out everywhere, and its landing gear hung down, looking very much like a long-legged,
big-winged bird, so it was given the nickname "Storch" (the German word for stork).
Virtually nothing about a Storch is streamlined. It was a purpose-built, short takeoff and landing (STOL) aircraft which, with a bit of
headwind, could become airborne in less than 200 feet, and when its low landing speed was combined with a strong headwind,
the Storch appeared to land vertically, and sometimes looked like it was flying backwards.
飞行参数
推荐配置
Specification
Suggested Equipment
翼展:1600mm(63inch)
推荐马达: 2814-2820 KV800-1000
推荐桨叶: 10-12寸
机长:1000mm(40inch)
推荐电调: 40A
起飞重量: 1.7-1.9kg
推荐舵机: 9gx8pcs
Wingspan: 1600mm(63inch)
推荐电池 4S 2200-2800mAh
推荐6通道以上接收机
Fuselage Length: 1000mm(40inch)
Flying Weight: 1.7-1.9kg
Suggested Motor: 2814-2820 KV800-1000
Suggested Propeller: 10-12inch
Suggested ESC: 40A
选配配件
Suggested Servo: 9gx8pcs
Optional Parts
Suggested Battery: 4S 2200-2800mAh
Radio:more than 6CH
舵机延长线15cm 6根
Y线 3根
舵机反向器 2个
Servo extension wires 6pcs
Y-wire 3pcs
Servo Reverser 2pcs
S21

Advertisement

loading

Summary of Contents for Dancing Wings Hobby 1.6M Fieseler Fi 156 Storch

  • Page 1 Balsawood Airplane 注意事项 SAFETY PRECAUTIONS ● 这个产品不是玩具,而是一个复杂的具有难度的飞行器。您和您身边人的安全取决于您如何操作它,您需要了解相关知识,并谨慎操作。禁止 没有成人陪伴的儿童独自操作该设备。不适合14岁以下人群使用。再次强调,这不是一个玩具。 This product should not be considered a toy, but rather a complicated and sophisticated flying model. Your safety depends ● on how you use and fly it, If not correctly operated, could cause injury to you or your family members. Children must be accompanied by an adult at all times if operating this product.
  • Page 2 散件 KIT 工具 Tools Needed F6-1 F6-1 01-5 F17*2 方碳管3*3*375mm Square Carbon Tube 方碳管3*3*495mm Square Carbon Tube 方碳管3*3*390mm 配件图仅做参考用,您收到的实物可能 Square Carbon Tube 因为修改/优化的原因导致与图片有略有 01-6 不同。 Photos shown here just for reference, the product you received maybe slightly differ from the photos due to continuous improvement on products.
  • Page 3 机翼组装参照1:1图纸组装,拼装时在平面工作台进行,并保持机 机翼组装 Assemble the Wing 正面 Front 反面 Back 翼平直。部分细节见细节图。 01-13 01-14 The wing assembly is assembled as per a 1:1 drawing, which 02-6 磁铁 is carried out on a flat table and keeps the wing straight. See Magnet the details for some details. 细节1 F18-7 Detail 1...
  • Page 4 机翼安装 Assemble the Wing and Tail 像真件组装 副油箱 Assemble the scale parts Auxiliary tank 05-1 05-2 天线 03-3 碳管 2mm*51mm Antenna 碳管 10mm*110mm Carbon Tube 03-1 Carbon Tube 碳管 8mm*170mm Carbon Tube 碳棒 2mm*25mm 航灯 Carbon Rod Navigation light 03-4 此部位先不粘固...
  • Page 5 起落架安装 可变前缘,襟翼,副翼安装 Assemble the Landing Gear Assemble the movable leading edge,flap and aileron G1插入机身,用胶水粘 06-1 合固定,G2插入机身后 在内部用轮挡锁定。 G1 is inserted into 轮挡(固定) the fuselage and wheel block (fixed) glued, G2 is inserted into the fuselage and locked inside by the 螺丝+螺母...
  • Page 6 此机型结构为电动马达设计,如您需要安装油动引擎,我们为您提供了2 机身内舵机安装 块油动引擎防火墙,安装需要一定的改装和加固,需要您自己动手修改。 Assemble the servo inside the fuselage This model is designed for electric motor. If you need to install the oil engine, we provide you with 2 oil engine firewalls. The installation 用桐木杆和Z型钢丝制作连杆,如下图,一端为Z型,一端为直头,用线绑 needs certain modification and reinforcement. You need to modify it 扎,胶水粘固。制作时对比机身内舵机到尾部舵角的距离,调整连杆长度。...
  • Page 7 设置和调试 Set and Adjust 常规飞行(Normal Flying) 3D飞行 部分飞机支持(3D Flying only support some models) 副翼 Aileron ±(15°-30°) ±40° 或者更大(or larger) 重心位置展示 平尾 Elevator ±15° ±40° 或者更大(or larger) Display the C.G 垂尾 Rudder ±15° ±40° 或者更大(or larger) 常用襟翼 Flap (起飞 take-off)15°-20° (降落 Landing)20°-40° ≈70-75mm 部分特殊机型会有V型尾翼,襟翼,前缘机翼或舵面很小等,可以以常规飞行的角度作为参考,在您不确认且没有有经验人员指导...
  • Page 8: Pre-Flight Checks

    地面控制方向测试 Control Directions Tests 飞行前的建议 遥控器动作 飞机反应 PRE-FLIGHT CHECKS ● 安装舵机前,请先将舵机通电让舵机中心点回中,以便能更好的调试舵面。 升 ● Check/adjust servo centering, in order to adjust the control surface better. 升降杆下拉 降 ● 初次启动电机,您需要确认电机旋转的方向以适配您的机型。 Lifting rod down 舵 ● Double-check the spinning direction of motor at first usage, and sure it’s suitable for your model. ●...

This manual is also suitable for:

S21