Troubleshooting - Electrolux EN2400AOW User Manual

8. TROUBLESHOOTING

CAUTION!
Before troubleshooting, disconnect
the power supply. Only a qualiied
electrician or competent person
must do the troubleshooting that
is not in this manual.
WARNING!
There are some sounds
Problem
The appliance is noisy.
The compressor
operates continually.
Water lows on the rear
plate of the refrigerator.
Water lows into
the refrigerator.
Water lows on
the ground.
There is too much
frost and ice.
The temperature in the
appliance is too low.
02 12 2013_Electrolux -Rex UM_1.indb 69
during normal use (compressor,
refrigerant circulation).
Possible cause
The appliance is not
supported properly.
The Temperature regulator
may be set incorrectly.
The door is not
closed correctly.
The door has been
opened too frequently.
The product temperature
is too high.
The room temperature
is too high.
During the automatic
defrosting process, frost
defrosts on the rear plate.
The water outlet is clogged.
Products prevent
that water lows into
the water collector.
The melting water
outlet does not low
in the evaporative tray
above the compressor.
Products are not
wrapped properly.
The door is not closed
correctly.
The Temperature regulator
may be set incorrectly.
The Temperature regulator
may be set incorrectly.
ENGLISH
Solution
Check if the appliance
stands stable (all the four
feet should be on the loor).
Set a warmer temperature.
Refer to "Closing the door".
Do not keep the door open
longer than necessary.
Let the product
temperature decrease to
room temperature before
storage.
Decrease the room
temperature.
This is correct.
Clean the water outlet.
Make sure that products
do not touch the rear plate.
Attach the melting water
outlet to the evaporative
tray.
Wrap the products better.
Refer to "Closing the door".
Set a higher temperature.
Set a higher temperature.
2015-09-22 15:39:55
69