Saving Your Configuration - Holybro KAKUTE F7 HDV Manual

Blackbox
If you have enabled the Blackbox feature, go to the Blackbox tab on the left-hand side of the
configurator window. In the Blackbox tab, at the top, set the Blackbox logging device to "SD Card" (it
should be set like this by default). Set the Blackbox Logging Rate to 2 kHz. To use Blackbox logging, insert
a FAT-formatted SD card of 32 GB or smaller into the SD card slot on the Kakute F7. You can use the
Betaflight Blackbox Log Viewer app to examine blackbox logs.

Saving Your Configuration

Once you have finished building, configuring, and tuning your multirotor, it's a good idea to back up your
configuration so that you can restore it later. This is useful if you lose your quad, or if you damage your
flight controller, or if you accidentally lock yourself out of your flight controller and must reset it to get
back in.
Before we show you the right way to save and restore your configuration, let us warn you about the
wrong way. Betaflight and Cleanflight have a "save configuration" and "restore configuration" button.
Without going into too much detail, they have some significant drawbacks that mean we don't
recommend that you use them.
The correct way to save your configuration is as follows.
1. Connect your Kakute to your PC by plugging in USB.
2. Start the Betaflight GUI app.
3. Go to the CLI tab.
4. In the text box at the bottom of the CLI, type "diff all" and hit enter. This will cause the flight
controller to display all configuration options that you have changed from the default values.
5. In the lower-right corner of the configurator, click the "Save to File" button.
6. Save the file somewhere you won't lose it.
To restore your configuration, do this:
1. Open the text file in your text editor.
2. Highlight the entire contents of the file.
3. Right-click in the text editor window and choose "Copy".
4. Connect your Kakute to your PC by plugging in USB.
5. Start the Betaflight GUI app.
6. Go to the CLI tab.