TECHWOOD TRO-1051 Instruction Manual page 8

Before first use, remove the unit and all accessories carefully and paying attention
to the sharp accessories.
Clean with soap and water, bowls and all accessories. Rinse and dry thoroughly.
Clean the outside and inside of the machine cabinet with a damp cloth and wipe
dry.
● Unroll the power cord completely.
● Check that the tension in force in the country where you are corresponds to
that indicated on the apparatus.
● Connect the apparatus in a correct socket-outlet, (and connected to the ground
if the unit is Class I), to avoid any danger.
● Disconnect the power source cable before any operation of cleaning of
maintenance and accessories assembly.
● Never modify the appliance in anyway.
Attaching the mixing bowl
1. Make sure the power cord is unplugged and the shift selector is set to '0'.
2. Press the unlock button, lift the arm until the top of the unit is in the open
position.
3. Insert the bowl on the base and turn to the right (clockwise) until it locks into
place.
4. To unblock the bowl, Press the unlock button, Lift the arm until the top of the
unit is in the open position.
1. Turn the bowl to the left (counter clockwise) to release it from the base.
BEFORE FIRST USE
IMPLEMENTATION
8