TECHWOOD TRO-1051 Instruction Manual page 4

The temperature of accessible surfaces may be very high
❑
when the appliance is operating. Never touch these parts, of
apparatus, to avoid burning itself.
Make sure the appliance never comes into contact with
❑
flammable materials, such as curtains, cloth, etc...& the
power cord and plug do not come in contact with water.
Before cleaning, always unplug the appliance from the power
❑
supply and let it cool down.
This appliance is not intended to be operated by means of an
❑
external timer or separate remote-control system.
Always place the unit on a flat surface. Ensure, also, not to
❑
cover the device and not to put anything on it.
Always remove the plug from the wall socket when the
❑
appliance is not in use.
When using an extension lead always make sure that the
❑
entire cable is unwound from the reel. Use solely CE
approved extension leads. Input power must be at least 16A,
250V, 3000W.
Incorrect operation and improper use can damage the
❑
appliance and cause injury to the user.
This device, designed for home use, complies with standards
❑
relating to this type of product.
The appliance must be used and rested on a table or flat &
❑
stable surface.
The item must not be left unattended when it is connected to
❑
main supply.
The item is not to be used, if it has been dropped or if there
❑
are visible signs of damage or if it is leaking.
Regarding the instructions for cleaning, thanks to refer to the
❑
below paragraph of the manual.
This appliance is only intended for household use.
❑
4