TP48200A
Installation Guide
Step 3 Connect one end of the RRU power cable to the power port on the RRU.
Ensure that the RRU power cable for an RRU added to a running base station must be connected
to the RRU first and then to the power equipment. The operations in the reverse sequence may
cause component damage or personal injury.
Issue Draft B (2014-01-20)
Figure 9-15 Installing the ground clips (side elevation view)
Figure 9-16 Installing the ground clip
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Installing Cables
47