Idis DA-WM2160 Installation Manual

DA-WM2160 INSTALLATION MANUAL
Mounting
Mount the bracket to the wall as follows:
Mount bracket to the wall by using the anchors and screws.
Connect your camera to the bracket as follows:
Assemble the camera body to the bracket by tightening the screws.
This manual is intended for users of the DA-WM2160 wall mounting
bracket. It includes instructions for mounting the DA-WM2160 wall
mounting bracket to a wall.
• This bracket is intended to be used with some models
of dome cameras. Do not use it with other models of
cameras.
• This installation should be performed by a qualified
service personnel in conformance to all local codes.
• You may need to reinforce the wall. If the wall is not strong
enough to support the camera, the camera may fall.
• Do not use this product for other purposes.
Bracket
wall