FM4100 INSTALLATION MANUAL
Mounting
1
Make a hole in the ceiling to install the
bracket using the provided guide pattern.
2
Place the foot of the product as shown in the
figure and push it into the ceiling.
3
Mount the bracket to the ceiling, then fix it
by turning the screws clockwise.
Be careful not to tighten the screws with too much
force.
4
Assemble the camera body(DC-D4213RX) to
the bracket until it clicks.
When disassembling the product, you can remove the
product by pressing the hook with a flat screwdriver.
This manual is intended for the users of the FM4100 ceiling mounting bracket.
It includes the instructions for mounting the FM4100 ceiling mounting bracket
to the ceiling.
• This bracket is intended to be used with DC-D4213RX. Ask your
retailer for details on a specific model and do not use it with other
models of cameras.
• This installation should be performed by a qualified service
personnel in conformance to all local codes.
• You may need to reinforce the ceiling. If the ceiling is not strong
enough to support the camera, the camera may fall.
• Do not use this product for other purposes.
< O >
Hook
< X >