Scanreco G5 Instructions Manual
  1. Manuals
  2. Brands
  3. Scanreco Manuals
  4. Repeater
  5. G5 Pocket System
  6. Instructions manual
Scanreco G5 Instructions Manual

Scanreco G5 Instructions Manual

Transmitter, repeater, receiver
Hide thumbs Also See for G5:
1
2
3
4
5
6

Advertisement

Table of Contents

Transmitter
Scanreco G5 Repeater Instructions................3
Normal Repeater Operation ....................................6
Repeater
100%
50%
100%
50%
Receiver

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the G5 and is the answer not in the manual?

Questions and answers

Related Manuals for Scanreco G5

Summary of Contents for Scanreco G5

  • Page 1: Table Of Contents

    Receiver 100% 100% Scanreco G5 Repeater Scanreco G5 Repeater Instructions....3 Pair Rocket Flex with G5 CAN Receiver ....3 Convert a Rocket Flex transmitter into a repeater ..4 Pair a Rocket Flex transmitter with a repeater ..5 Normal Repeater Operation ........6...
  • Page 2 Scanreco G5 Repeater Short Instructions...

  • Page 3: Scanreco G5 Repeater Instructions

    Scanreco G5 Repeater Scanreco G5 Repeater Instructions Pair Rocket Flex with G5 CAN Receiver The Scanreco G5 system has the capability of adding a repeater to extend the range of the system. Below are LED 3 the instructions to setup the repeater and how to oper- 100% ate a system with a repeater.

  • Page 4: Convert A Rocket Flex Transmitter Into A Repeater

    Scanreco G5 Repeater Convert a Rocket Flex transmitter into a repeater If you don’t see LED 3 blinking, try If your Rocket Flex transmitter is currently not paired again with the same repeater. with your receiver, then you will need to do the previ- ous set of instructions.

  • Page 5: Pair A Rocket Flex Transmitter With A Repeater

    Scanreco G5 Repeater Pair a Rocket Flex transmitter with a repeater 3. Turn off REPEATER by pressing button 8. 1. Press both buttons 5 and 6 on the REPEATER, Repeater and you will see LED 2 turn on. This puts the REPEATER in a mode like that of a RECEIVER’s...

  • Page 6: Normal Repeater Operation

    Scanreco G5 Repeater Normal Repeater Operation Special notes about the repeater • The REPEATER can function as a standard trans- 1. Now apply power to the RECEIVER. mitter, just by pressing the on button for your sys- tem’s configuration. 2. Press both buttons 4 and 6 on the REPEATER, and you will see LED 2 turn on.

Table of Contents