Specifications; Crimp Specifications; Safety Precautions; Setting Up The Hand Tool - FCI DUBOX HT-2234 Manual

SPECIFICATIONS:

Length ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 197.5 mm ( 7.78")
Width ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
Height ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 145.5 mm (5.72")
Weight ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 240 grams (.53 lbs)
Color ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. Black with Blue Handles
CRIMP SPECIFICATIONS: Refer to FCI application specification "TA-317"

SAFETY PRECAUTIONS:

CAUTION: Verify that the hand tool is free of any debris, such as wire strands and that it manually operates
correctly.
CAUTION: This tool is designed to be operated by hand. Never install the HT-2234 hand tool in an air or
pneumatic assisted device as damage to the tool and increased safety concerns will result.
CAUTION: It is suggested to wear lightweight gloves when handling hand tools and terminals.

SETTING UP THE HAND TOOL:

ATTACHING THE TOOL HEAD:

1. Push on both attachment pins from the front to disengage the locking feature of the pins, as shown in
Figure 1 above. Turn the tool around and manually pull out on each of the pin heads to fully retract the
pins until each pin locks into the retracted position, as shown in Figure 2 above.
FCI USA, Inc.
Issued: Date (12/20/2012)
65.2 mm ( 2.57")
Manual P/N 10123594-9090
Page 5 of 9
Revision 3