Clock; Timer; Tones; Control Lock - Whirlpool WMC20005 Use & Care Manual

Whirlpool microwave oven user manual
Table of Contents

Advertisement

This is a standard 12-hour clock (12:00-11:59).
To Set:
The microwave oven must be off.
1. Touch and hold CLOCK (TIMER/CLOCK) pad for 3 seconds
to enter Clock mode. The "hour" digit will flash.
2. Touch [+] or [–] pad repeatedly until the desired hour is
displayed (1 to 12).
3. Touch CLOCK pad to confirm the hour. The "minutes" digits
will flash.
4. Touch [+] or [–] pad repeatedly until the desired minutes are
displayed (0 to 59).
5. Touch CLOCK pad to confirm the minutes and exit Clock
mode.
To Cancel Clock: Enter Clock mode, then touch CANCEL/OFF.
The ":" will appear in the display.
NOTE: The Timer does not start or stop the microwave oven.
Cook functions may be used while the Timer is counting down.
When the cook function is active in the display, touch
TIMER/CLOCK to see the Timer count down for 3 seconds.
Touching TIMER/CLOCK while the Timer is active in the display
will send the Timer countdown to the background. While the
Timer is running in the background, the colon will flash.
The Timer may be set in the following increments, in minutes and
seconds:
INCREMENT
TIME SETING
0:05
0:05 to 1:00
0:15
1:15 to 3:00
0:30
3:30 to 6:00
1:00
7:00 to 30:00
To Set:
1. Touch TIMER/CLOCK. The default time of 5 seconds will
show in the display.
2. Touch the [+] or [–] pad repeatedly to set the desired time.
Touching and holding the pad will cause the display to scroll
rapidly through the increments
3. Touch START.
When the set time ends, the end-of-Timer tone will sound.
To Cancel Timer: While the Timer countdown is active in the
display, touch CANCEL/OFF.
If a cook function countdown is active in the display, touch
TIMER/CLOCK to show the Timer countdown, then touch
CANCEL/OFF to cancel the Timer. Touching CANCEL/OFF while
a cook function countdown is active in the display will cancel the
cook function, not the Timer.
The time can be reset during the countdown by repeating Step 2
above while the Timer is active in the display.

Clock

Timer

Tones are audible signals, which cannot be turned off, and
indicate the following:
One tone
Valid entry
Clock mode entered
Control lock activated
End of cooking reminder
Three tones
End of cooking cycle
During Defrost cycle, reminder to check, turn, rearrange, or
separate food
Invalid entry
Twenty tones
End of Timer (very short, quick tones)

Control Lock

The Control Lock disables the control panel pads to avoid
unintended use of the microwave oven.
To Lock/Unlock Control: The microwave oven must be off.
Touch and hold CANCEL/OFF for 3 seconds until the tone
sounds and "Loc" appears in the display. The display will return
to time of day mode (if Clock is set) after 3 seconds. Repeat to
unlock.
If any control pad is touched while the Control Lock is active,
"Loc" reappears in the display for 3 seconds, and invalid entry
tones will sound.

Tones

7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

 wmc20005yw wmc20005yb wmc20005ydWmc20005y

Table of Contents