Using Start Time - Whirlpool RM978BXS Use & Care Manual

Upper microwave oven eye-level and built-in models
Hide thumbs Also See for RM978BXS:
Table of Contents

Advertisement

1. Put food in the oven and close the door.
2. Touch COOK/REHEAT or COOK FROZEN.
3. Touch a Number Pad for the cooking category you want.
4. Touch PAUSE.
5. Touch START.
When the first part of the AUTO SENSOR cycle is done, you will hear 2 beeps
and the oven will shut off.
6. Open the door. Stir or turn the food or add ingredients. Close the door.
7. Touch START to continue.
Using START TIME to delay start of cooking
The microwave oven can be set to start automatically
at a later time. Use
START TIME to delay the start of cooking up to 11 hours, 59 minutes.
DO THIS...
THIS HAPPENS...
1.
Make sure Clock is
set to the correct
time of day. See
page 9 if any
change is needed.
2. Put food in the oven
and close the door.
(See CAUTION
on page 34.)
0. m
3.
Touch COOK 1.
4. Touch Number
Pads for the cook-
ing time you want.
5. Touch COOK
POWER. (Option:
Skip to Step 7 if you
want to use high
32
power.)
NOTE: Many cycles can be set when using
START TIME. (See "Additional
Information"
on page 34.) Instructions
for a single cycle
are as shown.
The COOK 1 Indicator Light
will come on and the Dis-
play will show four 0's.
The Display will show the
numbers you touched in
the order you touched
them. This example shows
6 minutes, 30 seconds.
The COOK POWER Indica-
tor Light will come on and
the Display will show "P-HI:'
This shows the oven is pre-
programmed
to cook at
full (HIGH) power.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rm973bxsRm278bxsSm988pesSm958pes

Table of Contents