Intercel eSAM User Manual page 2

This guide will explain how to set up a basic configuration for accessing and IP camera remotely using the eSAM
router.
To achieve this, we will follow the following steps
1. Enable remote access on the modem
2. Port Forward from the modem to the IP Camera so we can access it remotely.
3. Create a Dynamic DNS (DDNS) URL we can use to access the modem remotely without needing to know its
IP Address
Please consult the instruction manual of your IP camera before proceeding, as different cameras may operate in
different ways.
If you have any queries regarding the eSAM, please contact Intercel technical support at intercel@intercel.com.au.
2