Product Documentation; Product Documentation Set - ABB Relion 650 Series Commissioning Manual

Section 1
Introduction
1.3

Product documentation

1.3.1

Product documentation set

IEC07000220 V1 EN-US
Figure 1:
The engineering manual contains instructions on how to engineer the IEDs using the different
tools in PCM600. The manual provides instructions on how to set up a PCM600 project and insert
IEDs to the project structure. The manual also recommends a sequence for engineering of
protection and control functions, LHMI functions as well as communication engineering for IEC
60870-5-103, IEC 61850 and DNP3.
The installation manual contains instructions on how to install the IED. The manual provides
procedures for mechanical and electrical installation. The chapters are organized in chronological
order in which the IED should be installed.
The commissioning manual contains instructions on how to commission the IED. The manual can
also be used by system engineers and maintenance personnel for assistance during the testing
phase. The manual provides procedures for checking of external circuitry and energizing the IED,
parameter setting and configuration as well as verifying settings by secondary injection. The
manual describes the process of testing an IED in a substation which is not in service. The
chapters are organized in chronological order in which the IED should be commissioned.
The operation manual contains instructions on how to operate the IED once it has been
commissioned. The manual provides instructions for monitoring, controlling and setting the IED.
8
Engineering manual Engineering manual Engineering manual
Installation manual Installation manual Installation manual
Commissioning manual Commissioning manual Commissioning manual
Operation manual Operation manual Operation manual
Service manual Service manual Service manual
Application manual Application manual Application manual
Technical manual Technical manual Technical manual
Communication protocol Communication protocol Communication protocol
manual manual manual
The intended use of manuals in different lifecycles
© Copyright 2011 ABB. All rights reserved
1MRK 505 268-UUS A
GUID-3AA69EA6-F1D8-47C6-A8E6-562F29C67172 v9
en07000220.vsd
Breaker protection REQ650
Commissioning manual