Table of Contents
Advertisement
Quick Links
DESCRIPTION OF THE DEVICE
Backlight key
Select key
PERFORM A MEASUREMENT
Turn on the device by pressing on « On/Off/Esc ».
➢
The device displays its name « TR110 » or « TR112 ».
Put the probe to the required location.
●
The device displays the temperature measurement with below the type of thermocouple.
If the used thermometer is the TR112 with two connected probes, the device will display the two measurements.
Press on « OK » to display the delta between the two temperatures.
➢
FREEZE THE MEASUREMENT
During the measurement :
Press once on « Hold/min/max ».
➢
« Hold » appears on screen and the measurement is frozen.
Press on « On/Off/Esc » to exit the hold function.
➢
The device returns to the measurements display.
DigiParts GmbH
PT100 thermometer
TR 110 – TR 112
www.digiparts.ch
OK key
On/Off/Esc key
Hold/min/max key
info@digiparts.ch
Advertisement
Table of Contents
Related Manuals for Kimo TR110
Summary of Contents for Kimo TR110
- Page 1 PERFORM A MEASUREMENT Turn on the device by pressing on « On/Off/Esc ». ➢ The device displays its name « TR110 » or « TR112 ». Put the probe to the required location. ● The device displays the temperature measurement with below the type of thermocouple.
- Page 2 Press once on « Hold/min/max ». ➢ If the device is a « TR110 » or a « TR112 » with one connected probe, the device displays the maximum value measured since the last ● questioning at the top of the screen and the minimum value measured since the last questioning at the bottom of the screen.
- Page 3 Activate or deactivate the keys beep : The device is on and displays the measurement. Press on « Select » until « BEEP » blinks on screen. ➢ Press on « OK ». ➢ « OFF » or « ON » blinks on screen. Press on « Select » to activate the keys beep « ON » or deactivate it « OFF » . ➢...
Need help?
Do you have a question about the TR110 and is the answer not in the manual?
Questions and answers