Table of Contents
Advertisement
Quick Links
DESCRIPTION OF THE DEVICE
Backlight key
Select key
PERFOMS A MEASUREMENT
Turn on the device by pressing on « On/Off/Esc ».
➢
The device displays its name « TK110 » or « TK112 ».
Put the probe to the required location.
●
The device displays the temperature measurement with the type of thermocouple below.
If the used thermometer is the TK112 with two connected probes, the device will display the two measures.
Press on « OK » to display the delta between the two temperatures.
➢
DigiParts GmbH
Thermocouple thermometer
TK 110 – TK 112
OK key
On/Off/Esc key
Hold/min/max key
www.digiparts.ch
info@digiparts.ch
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Kimo tk110
Summary of Contents for Kimo tk110
- Page 1 PERFOMS A MEASUREMENT Turn on the device by pressing on « On/Off/Esc ». ➢ The device displays its name « TK110 » or « TK112 ». Put the probe to the required location. ● The device displays the temperature measurement with the type of thermocouple below.
- Page 2 Press once on « Hold/min/max ». ➢ If the device is a « TK110 » or a « TK112 » with one connected probe, the device displays the maximum value measured since the last ● questioning at the top of the screen and the minimum value measured since the last questioning at the bottom of the screen.
- Page 3 Select the measuring unit : The device is on and displays the measurement. Press on « Select » until « UNIT » blinks on screen. ➢ Press on « OK ». ➢ The unit currently used blinks on screen. Press on « Select » until the required unit appears : °C or °F. ➢...
- Page 4 Change the old batteries by AAA LR03 1.5V batteries. ➢ Replace the front. ➢ Once returned to KIMO, required waste collection will be assured in the respect of the environment in accordance to 2002/96/CE guidelines relating to WEEE www.digiparts.ch info@digiparts.ch DigiParts GmbH...
Need help?
Do you have a question about the tk110 and is the answer not in the manual?
Questions and answers