Advertisement
ICP2 USB Driver Installation
2 Verifying the Installation
This section will guide you on how to verify if the ICP2 USB was properly installed. You will also need to
determine the COM port assignment made by Windows for the ICP2 USB port
To verify if the device is properly installed and determine the COM port assignment of the device:
1. Click Start → Settings → Control Panel → System. Inside "System Properties" click "Hardware"
2. Click "Device Manager"
3. Double-click "Ports (COM & LPT)"
Rev: July-2007
Page 5 of 8
Advertisement
Need help?
Do you have a question about the ICP2 and is the answer not in the manual?
Questions and answers