Logitech CONNECT Setup Manual page 5

1. Video Conferencing Mode:
1. Connect the USB cable to the device and to your USB
port
2. To start a call from your PC or Mac application, select
Video Conferencing Mode on Connect The camera and
speakerphone LEDs will flash to show that connection is
taking place, and when completed, the camera LED will
light steady for a few seconds and the speakerphone
will play a sound If these activities do not take place,
try again and then consult Troubleshooting or call
technical support
3. Ensure that Connect is selected as the default video
and audio device in your OS settings and in your
conferencing application Start your video or audio call
from your application The LEDs on the camera and
speakerphone will alight when streaming
2. Bluetooth Mode
To pair Connect speakerphone to your mobile device:
1. Select Bluetooth mode on the Connect
2. If your device is NFC enabled, touch the mobile device
to the NFC icon on the speakerphone, which should
enable Bluetooth acceptance on the mobile device, or
hold down the Bluetoot
speakerphone starts blinking blue rapidly
3. On your mobile device, go to settings and turn on
Bluetooth to connect The Connect will also play a
sound to acknowledge connection
8 English
h
button until the LED on the
USE YOUR PRODUCT
Video
– Starting the video: The video is controlled by the
application and will start once the camera is selected and
the video is started in the application Camera LED will light
when the video is streaming
– Pan, tilt and zoom the camera using the controls on the
remote control Press once for incremental or press and
hold for continuous pan or tilt You can also pan and tilt the
camera image – first zoom in, and then pan the image or
tilt the image You may also tilt the actual camera with the
tilt wheel on the unit Do not manually try to tilt camera
itself Doing so may damage unit
– Saving pan, tilt and zoom settings: An optional application
is available which includes a software interface to control
camera settings These can be saved so your camera
settings remain next time you turn on the unit You may
download the software from
www.logitech.com/support/connect
Audio
– Volume: Volume Up and Down adjusts volume
– Mute: Mute audio with Mute button
– Calling: Run video conferencing software Answer picks up
call Hang up ends call For call waiting, select hang up to
reject second call or answer button to toggle between calls
Note: Answer and Hang up buttons may not work in some
applications Use video conferencing software to answer
and end call
– SpeakerPhone Activity light indications
English 9