Before First Use - Princess 01.338900.01.001 Instruction Manual

the desired length. The magnetic strip can be placed on the floor. The
robot vacuum cleaner will not exceed this line.

BEFORE FIRST USE

• Take the appliance and accessories out the box. Remove the stickers,
protective foil or plastic from the device.
• Install the Application called "HomeWizard Cleaner" from the App Store.
The App will show up as "Cleaner" when installed.
Battery Charging
• Place charging station against the wall and remove obstacles within 1
meter at two sides and 2 meters ahead.
• If the Cleaner is shut down, turn on its power switch at the right side of
Cleaner before charging.
• Charge the Cleaner in either of the following ways:
a. Plug the adapter into the Cleaner and plug the other end into the
power socket, as shown in Fig a.
b. Press on Cleaner to direct the Cleaner to charging station for
recharging, as shown in Fig b.
• Make sure the power switch of Cleaner is turned on while charging.
Otherwise, it will show an error on LED display and will not charge.
• When the Cleaner is charging, the power indicator will blink.
• Once charging is completed, the power indicator will be on and stop
blinking.
• In standby status, the Cleaner will play a sound when battery power is
low.
• During working, the Cleaner will return to charging station automatically
when battery power is low.
Tips to extend battery life:
• Before first use, charge the Cleaner for 12 hours.
• Charge the Cleaner as soon as battery power is low.
• During cleaning, Cleaner will return to charging station automatically
when it is done cleaning or when the battery is low.
• If the Cleaner is not to be used for more than 3 months, charge the
battery in the Cleaner for 12 hours, turn off the power of the Cleaner,
remove the battery from the Cleaner and store it in a cool, dry place.
EN
27