Motorola DOCKCONTROLLER DC-200 Quick Start Manual page 6

Once successfully connected, the Power LED on top of the DC-200 will turn on, followed by an Ethernet Link Indicator light and then the
Ethernet Activity Indicator.
Subsequently the A LED will turn on. If the DC-200 is in Open Mode the B LED will blink slowly. If the DC-200 has been configured & successfully
connected to VideoManager the B LED will light solidly.
B LED
Top
Front
A LED
Power LED
Side
Link LED
Activity LED Back
Bottom
QUICKSTART GUIDE | DOCKCONTROLLER DC-200 6