Vaniman SandVac Original Instructions Manual

CAUTION:
1. CONDITIONS FOR USE
This micro abrasive blaster may only be operated:
• Indoors;
• Below 1981 m (6500 ft) above sea level altitude;
• Ambient air temperature between 40°-105°F (5-40°C);
• Maximum relative humidity of 80% at 31°C (88°F);
• Power supply current fluctuations does not exceed 10% of nominal value;
• Under level 2 contamination conditions;
• Supply cool, dry air only, at a maximum pressure of 10.3 Bar (150 PSI).
2. SAFETY
WARNING:
with this power tool. Failure to follow all instructions listed below may result in electric shock, fire
and/or serious injury
Save all warnings and instructions for future reference
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or BATTERY-operated
(cordless) power tool.
1. Work area safety:
a) Keep work area clean and well lit. Cluttered or dark areas invited accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating this power tool. Distractions can cause you to lose control.
2. Electrical Safety:
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric
shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable
for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a RESIDUAL CURRENT DEVICE (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
3. Personal Safety
a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power
25799 Jefferson Ave., Murrieta, CA 92562
ORIGINAL INSTRUCTIONS
Read the instructions before using this equipment
MICRO-ABRASIVE BLASTERS
Read all safety warnings, instructions, illustrations and specifications provided
1-800-VANIMAN (826-4626) USA

ENGLISH
www.vaniman.com sales@vaniman.com
 
SANDBLASTER-I 04/17 Page 1