Care & Maintenance; Cleaning; Winterizing - G&F Manufacturing Gulfstream HE125RA Install & Operation Manual

Swimming pool heat pump
Table of Contents

Advertisement

16
Downloaded from https://gadgetsgo.com/HE125RA-Gulfstream-122K-BTU-pool-spa-heatpump.html Authorized Gulfstream Distributor
CARE & MAINTENANCE

CLEANING

There is not much maintenance that needs to be done on your
heater. Making sure there is good airflow through the evaporator and
proper drainage are the two main tasks. A garden hose with low-
pressure water flow can be used to clean the evaporator coil, DO
NOT spray the control box. Keep all shrubs trimmed back away from
the unit to allow sufficient airflow. Clean the coil as needed.
located near the ocean, cleaning will need to be done regularly to
remove salt and sand. Use a very soft brush so as not to bend the
coil fins with soapy water to remove any build up.
Make sure all power is disconnected to the heater prior to washing.
Keep the drain holes in the base free of debris to assure
proper condensation drainage.
Your heat pump's cabinet is made from a maintenance-free, rust-free
plastic that is UV-resistant. It will last for years and any dirt or dust
may be wiped away with a cloth or sprayed off with a water hose.
Only use products designed for cleaning plastics.
DO NOT USE CLEANERS THAT CONTAIN ALCOHOL.
Alcohol based cleaners may damage the plastic.

WINTERIZING

In areas where freezing conditions are not prevalent and winterizing
of pools is not common, allow water to flow through the heater even
when not in use.
In freezing areas, it is mandatory that the water be
completely drained from the heater and disconnected from
the piping. The heat exchanger must be blown out with air
to ensure no water in the heat exchanger.
CAUTION:
WARNING:
ATTENTION:
If

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents