Table of Contents
Advertisement
EXTA2-* Keyboard
Installation and Commissioning
3
Installation and Commissioning
3.1
Mounting the Keyboard Connecting Cable to a PC
Note!
For installation and connection in North America, refer to Control Drawing 116-0357B.
Connecting the Keyboard to a PC via the Keyboard Connecting Cable
Connect the wires of the keyboard connecting cable as shown in the following table.
Keyboard and Mouse (EXTA2-K*) Core Assignment
Keyboard
Mouse
Note!
Torque Specifications for Keyboard Lid
After connecting the keyboard, tighten the screws on the EXTA2 lid to a torque of 0.5 Nm (4.4 in
lb).
Connecting the Keyboard to a PC via Barrier KI153
1. Plug the USB plugs of the keyboard cables into the USB ports of the barrier. Use the USB
ports on the face labeled with "intrinsically safe."
2. Plug the USB plugs of the enclosed USB cables into the USB ports of the barrier. Use the
USB ports on the face labeled with "not intrinsically safe."
3. Plug the USB plugs of the enclosed USB cables into 2 unused PC USB ports. By using the
enclosed USB PS/2 adapters, you have the possibility to use the PC's PS/2 interface
instead of the USB ports.
EXTA2-F-T-K4US-U07UA-Z-10-N
EXTA2-F-T-K4US-U07UA-Z-10-N
16
Assignment
Ui
D+
D-
GND
Ui
D+
D-
GND
KEYBOARD INTERFACE KI153
IS
max. 5 m
IS
max. 5 m
KEYBOARD INTERFACE KI153
IS
max. 5 m
IS
max. 5 m
Ex- Area ATEX II 2G, II 2D
Color coding
green
brown
grey
yellow
red
white
pink
blue
PC
max. 2 m
2x CON ADAPT
2x CBL SET 04
025 PVC 180
USB-A-F/PS2
2 USB M0480
PC
USB
max. 2 m
USB
2x CBL SET 04
025 PVC 180
2 USB M0480
Advertisement
Table of Contents
