R-Biopharm Premi Test Technical Manual page 19

7.3 Program A
In 'Program A' incubation temperature and time can be set. After the set
time is reached, the incubator sounds an alert signal and the temperature
will stay at the set value.
'Program A' is intended to be used for the incubation of meat-, fish-, liver-
and serum/plasma samples. Therefore, incubation temperature is pre-set
to 64 °C (147.2 °F) and incubation time to 2 h 40 min.
Setting parameters of Program A
 Press and hold 'Prog' for 3 s
 The active parameter will flicker. To switch between parameters
(temperature, time and time unit) press 'Prog'.
 To change parameters press '' or ''.
 If no button is pressed for 5 s, the incubator confirms the actual setting
automatically and exits the setting mode.
°C
60.0
°C
64.0
°C
64.0
°C
64.0
2014-12-11
h
140
h
140
h
160
160
m
19 R-Biopharm AG