Advertisement
Chromoflex - Manual - English V1.07
to LEDs/Stripes
to Power Supply
to LEDs/Stripes
to Power Supply
to LEDs/Stripes
to Power Supply.
optionally
to PC
In the examples above 3 modules build a network. Please note: the module interconnection are 2
lines: GND and RS232-RX.
Factory pre-programmed Effects
Each module is shipped with 8 factory pre-programmed effects:
Effect 1:
Standard colour change, colour change each 5-60 seconds (depending on the
internal DIP switches). Colour transition time: 2.5 seconds
Effect 2:
Slow (very soft) colour change each 30-180 seconds (depending on the
internal DIP switches). Colour transition time: 10 seconds
Effect 3:
Randomly faded colours „Blob"
Effect 4:
User defined-colour change (can be changed by the „Chromoflex
Editor" software for PC, default is red-green-blue)
Effect 5:
Randomly changed colours „LSD"
Effect 6:
Simulation of a fire „Fire"
Effect 7:
Simulation of a thunderstorm with lightning („Flash")
Effect 8:
Randomly coloured flashes („Burst")
If you would like to edit your own colour change, this can be done very easily with our free software of
PC „Chromoflex Editor". This software can be downloaded for free from our website (see end of this
manual).
Note: The ChromoFlex modules are based on a programmable microprocessor that is also capable of
performing other complex tasks. We will be happy to realise your ideas for professional products. Do
not hesitate to send us an E-Mail.
The 8 effects can be selected by 4 buttons. Each button selects two effects:
Button 1:
1. Pushed once: effect 1 (normal colour change)
2. Pushed twice: effect 5: „LSD"
Button 2:
1. Pushed once: effect 2 (Soft colour change)
- www.barthelme.de
LEDs
Pwr+
Pwr- (GND)
RS232-RX
RS232-GND
LEDs
Pwr+
Pwr- (GND)
RS232-RX
RS232-GND
LEDs
Pwr+
Pwr- (GND)
RS232-RX
RS232-GND
10k
Buttons
Buttons
Buttons
- 8 -
Rev. 19.08.2010
optionally Buttons
optionally Buttons
optionally Buttons
Advertisement
