Advertisement
Assembly Instruction Steps:
1. Attach the Left & Right Headboards (B&C) to the Back Panel (A).
2. Secure with 4 sets of: Bolts (G), Spring Washer (I), Flat Washer (J), and Half-Moon Washer (H) from the cut-outs
on the Back Panel (A) and into the metal inserts located on the Left & Right Headboards (B&C).
3. Loosely tighten the bolts with Allen Key (F).
4. Hook the Side Rail (D) to both of the Headboards (B&C) with the solid ledge facing inside, as seen in the
illustration below.
5. Tighten all bolts after the side rail is in place.
G
I
J
H
6. Place Slat Roll (E) into the bed frame.
7. Secure with 28 Wood Screws (K) by using a Phillips Head Screwdriver (not included).
Care Instructions:
•
Dust often using a clean, soft, dry, and lint-free cloth.
•
Blot spills immediately and wipe with a clean, damp cloth.
•
We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered finish.
•
Hardware may loosen over time. Periodically check to make sure all connections are tight.
Re-tighten if necessary.
Date: 2013-May-30
Rev:
4x
4x
4x
4x
www.pbteen.com
F
G
J
I
K
28x
Page 3 of 3
Advertisement
