Advertisement
Important Safety Instructions:
•
Please read all instructions carefully before assembling this bed.
•
For your safety, assembly by two or more adults is strongly recommended.
•
Keep these instructions for future use.
•
Use only vendor-supplied hardware to assemble this item. Using unauthorized hardware could jeopardize the
structural integrity of the item.
Pre-assembly:
•
Remove all parts and hardware from the box. Place them on a carpeted or scratch-free work surface, as this
will avoid damaging parts during assembly. The shipping box provides an ideal work surface.
•
To avoid accidentally discarding small parts or hardware, do not dispose of any packaging or contents of the
shipping carton until assembly is complete.
•
Use the parts and hardware lists below to identify and separate each of the pieces included.
•
The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.
•
The use of power tools to aid in assembly is not recommended. Power tools can damage the hardware and
split the wood.
Parts Included:
(A) Back Panel (1x)
(B) Left Side Headboard (1x)
(C) Right Side headboard (1x)
(D) Side Rail (1x)
(E) Slat Roll (1x)
Hardware Included:
(F) Allen Key – 1x
(I) Spring Washer ¼" – 4x
Tools Required (not included):
Philips Head Screw Driver
Date: 2013-May-30
Rev:
(G) Bolt 1/4"x 45mm – 4x
(J) Flat Washer ¼" – 4x
www.pbteen.com
(H) Half Moon Washer – 4x
(K) Wood Screw 4x30mm – 28x
Page 2 of 3
Advertisement
