Layout Of Front Panel - Narada NPFC Series Operation Manual

4.3 – Layout of Front Panel
Fig. 4.1 – Layout of Front Panel for NPFC Series Batteries
Fig. 4.2 – Layout of Right Side Panel for NPFC Series Batteries
No. Marks
1 SOC
2 ALM
3 RUN
4 ADD
5 RS232
LiFePO Battery Module for Telecom
4
Table 4.3 – Instruction for Layout of Front Panel
Functions
There are four green LED lights in front panel indicating SOC.
Indicators for SOC is short for state of charge. Each SOC LED light represents
capacity 25% of rated capacity. Detailed information is shown in
Annexed Table 1.1.
Indicator for There is one red LED light in front panel indicating alarms.
alarms Detailed information is shown in Annexed Table 1.2.
Indicator for There is one green LED light in front panel indicating running
running status status. Detailed information is shown in Annexed Table 1.3.
ADD is applicable to modules connected in parallel. ADD
Address of consists of four binary bits, and maximum quantity of
communication batteries connected in parallel is 16pcs (2^4). Detailed
information is shown in Annex 2.
Up-link It is adopting RS-232 series port to upload data. Contents of
communication data transmit include BMS parameters, battery running
port status, alarms, etc. Generally, speed rate of RS-232 is
Operation Manual V8.3 2016
Part 4 – Operation & Maintenance
Detailed Information
13