Removing Plug-In Modules - Pepperl+Fuchs MFT Series Manual

Multifunction Terminal MFT-***.****(.L)
Dismounting, Maintenance, and Repair
5.1

Removing Plug-In Modules

Plug-in modules may be removed during operation.
Removing Plug-In Modules
1.
Push the lever above the plug-in module forward, into position 1. Note that the lever cannot
be pushed all the way forward.
The plug-in module is raised out of the base module. This separates the contacts between
the base module and the plug-in module.
2.
Push the lever forward a little farther, into position 2, and remove the plug-in module.
18
1
2