Connecting The Plug-In Module - Pepperl+Fuchs MFT Series Manual

Multifunction Terminal MFT-***.****(.L)
Installation
3.2

Connecting the Plug-In Module

Plug-in modules can be connected during operation.
Connecting the Plug-In Module
1.
Move the lever of the base module forward until it stops. Note that you cannot move the lever
forward completely.
2.
Press the lever of the base module forward until it stops. Guide the plug-in module
onto the grooves of the base module.
3.
Press the plug-in module onto the base module and push the lever over the plug-in module
until it engages.
The contacts between the base module and the plug-in module are connected
with one another.
13