Auto-Off Function; Turning The Demo Function Off - Panasonic SC-PM18 Operating Instructions Manual

A
SLEEP
AUTO OFF
DISC
PLAY MODE Y MODE
TUNER/
BAND
VOL
MUTING
S.SOUND EQ S.SOUND EQ
SLEEP
AUTO OFF
B
STOP , DEMO
STOP
DEMO
SLEEP SLEEP CLOCK PLAY
AUTO OFF UTO OFF TIMER REC
1 2 3
4 5 6
7 8 9
PGM 0 10
CD
CLEAR CLEAR
TAPE
AUX
VOL
REW FF
PRESET EQ PRESET EQ DISPLAY DIMMER DIMMER

Auto-off function

A
By remote control only
When CD or tape is selected as the source
To save power, the unit turns off if it is left unused for 10
minutes.
Note
This function does not work if the source is tuner or AUX.
Press and hold [–AUTO OFF].
"AUTO OFF" is shown on the display.
To cancel
Press and hold [–AUTO OFF] again to clear "AUTO OFF"
from the display.
For your reference
The setting is maintained even if the unit is turned off. When
the unit is turned on again, "AUTO OFF" is displayed and
the unit functions as described above.
"AUTO OFF" disappears from the display if either tuner or
AUX is selected as the source but continues to function
normally.
"AUTO OFF" remains displayed if CD or tape is selected as
the source.

Turning the demo function off

B
If the clock has not been set, a demonstration of the display
is shown when the unit is switched to standby mode.
This function is set to on at the time of purchase.
During standby mode
Press and hold [STOP L L L L L , –DEMO] until "NO DEMO"
is displayed.
The display changes each time the button is held down.
NO DEMO (off) (demo on)
To show a demonstration of the display
Press and hold [STOP L, –DEMO] until a demonstration of
the display is shown.
Note
• You cannot turn demo function off when the unit is on.
• DEMO function cannot be turned on when Dimmer is on.
21
RQT6683