Advertisement
1. Power the camcorder using the compact power adapter. (not necessary if you are initializing a
card for the first time).
*Do not disconnect the power source or turn off the camcorder until the
initialization is complete.
2. Open the initialization screen for the desired memory. Touch [FUNC.] > [MENU] > Wrench icon
> scroll down to the [Initialize] option > press [Initialize]
3. Touch [Yes].
•If you selected [Complete Initialization] option, you can touch [Cancel] to cancel the initialization
while it is in progress. All recordings will be erased and the memory can be used without any
problem.
4. Touch [OK] and then touch [x]
• Initializing the memory will PERMANENTLY erase all recordings. Lost original recordings cannot
be recovered. Make sure you save important recordings in advance using an external device.
• Initializing a memory card will PERMANENTLY erase any music files and images you may have
transferred to the card. (The music files and image mix frames that come pre-installed in the
built-in-memory will be restored after it is initialized).
To transfer music files from the supplied Camcorder Supplement Disc to the memory card:
- Windows users: Use the supplied PIXELA's software. For details, refer to the Software Guide (PDF
file) of the supplied PIXELA's software.
- MAC OS users: Use Finder to transfer music files from the [MUSIC] folder on the supplied
Camcorder Supplement Disc to the memory card.
Quick Start Function:
When you close the LCD panel with the camcorder on, the camcorder enters the standby mode. In
standby mode the camcorder consumes only 1/3 the power used when recording, saving energy
when you are using a battery pack. Additionally, when you open the LCD panel or pull out the
viewfinder, the camcorder is ready to start recording in approximately 1 second, allowing you to
record the subject right away.
* The camcorder will not enter standby mode with the ACESS indicator is on or flashing, while a
menu is being displayed or while using the viewfinder. The camcorder may also not enter standby
mode when the battery charge is too love. Check that the ON/OFF (CHG) indicator changes to
orange.
Recording in M (manual) Mode:
When the mode switch (top right of camera) is set to M (manual Mode), you can enjoy full access
to the menus and manually adjust exposure, focus, white balance and many more of the
camcorder's settings to your preference. Even in M mode, though, the camcorder can help you
with the settings. For example, by using Special Scene recording programs.
Selecting the Video Quality (Recording Mode):
file:///Volumes/Untitled/Camera%20Info/HFG20/guide%20to%20the%20hfg20.html[4/15/13 1:15:17 PM]
Advertisement
