Advertisement
2. Touch the wrench symbol
3. To turn on the black & white setting : Touch [ON] of [OFF]
4. For the peeking color: Touch [Red], [Blue], or [Yellow]
5. Touch the return symbol
6. Touch [PEAK]
• Peaking is activated and the edges are highlighted. You can turn the
focus ring on this screen or touch [X] to hide the focus controls.
• The peaking effect and black & white picture will not appear in your
recordings.
Face Detection:
The camcorder automatically detects people's faces and uses this information to select the optimal
focus and exposure settings.
*Face Detection is always activated in AUTO mode.
By default, the face detection is activated. If the function was turned off, perform the following
steps to turn it on.
1. Open the [Face Detection & Tracking] screen by touching [FUNC.] > [MENU] > Video camera
symbol > [Face Detection & Tracking].
2. Touch [ON] and then touch [X]
If there is more than one person in the picture, the
camcorder will automatically select one person it
determines is the main subject. The main subject is
indicated by a white face detection frame and the
camcorder will optimize the settings for that person.
Other faces will have gray frames.
Touch a different face on the screen to optimize the
camcorder's settings for that person using the touch
and track function.
Touch And Track:
When recording a group of animals, or just one, the
camcorder will automatically detect one animal as the main subject.
You can use Touch & Track to
tell the camcorder to track and optimize settings for a different subject. You can also use Touch &
Track to always keep in focus other moving subjects and people.
1. Make Sure Face Detection and Autofocus are activated.
2. Point the camcorder at a moving subject and touch the subject on the touch screen.
• A white double frame will appear around the subject and track it as it moves.
file:///Volumes/Untitled/Camera%20Info/HFG20/guide%20to%20the%20hfg20.html[4/15/13 1:15:17 PM]
Advertisement
