Download Print this page
Kohler BEAM K-23056T Installation Instructions

Kohler BEAM K-23056T Installation Instructions

Sensor faceplate

Advertisement

Quick Links

BEFORE YOU BEGIN
BEFORE YOU BEGIN
·
Read installation guide in illustration and word file
carefully, and install the tank according to instructions in
the guide to avoid product damage and installation
inconvenience caused by inappropriate operation.
·
All data contained is based upon the last product
information available at the time of publication. Kohler
Company reserves the right to implement changes of
product characteristics, packaging and availability at any
time without further notice.
·
Do not apply erosive cleanser and solvent in the tank,
which will damage tank spares and result in leakage in the
tank. Kohler will not be responsible for any damage
related to above mentioned cleanser or solvent.
·
Do not apply spares that are not provided by Kohler, and
please note that glass adhesive tape shall not be applied
to the installation of Kohler spares. Kohler will not be
responsible for any damage related to installation with
spares not provided by Kohler.
PRODUCT SPECIFICATIONS
PRODUCT SPECIFICATIONS
Region/
SKU number/SKU
Rated voltage/
Rated operational voltage/
Maximum instantaneous power/
Outer dimension of product/
(L*W)
Weight of product/
Ambient temperature of usage/
Flush control board LED light color/
LED
Entry induction distance/
Exit induction distance/
Entry Induction time/
Exit induction time/
Full flush induction time/
Half flush induction time/
KOHLER CHINA INVESTMENT CO., LTD
1331845-T01-B
China/
K-23056T
220V-240V~, 50/60 Hz /
6V
10%
8W
225mm
(Length x Width)
About/
°
1-55 C
Warm white 4K color temperature/
4k
700mm
900mm
1s
3~8s
60s
8~60s
JING'AN DISTRICT, SHANGHAI, PRC
(
)
·
·
·
·
160mm
X
2 Kg
30mm
30mm
NO.158, JIANG CHANG SAN ROAD,
POST CODE: 200436
158
©
Copyright Kohler China Investment Co., Ltd. 2018
-1-
©
BEAM
INSTALLATION INSTRUCTIONS
SENSOR FACEPLATE
K-23056T/K-23056TW
Asia/
(Taiwan/
)
K-23056T (K-23056TW)
220V-240V~, 50/60 Hz (110V~, 60 Hz)/
6V
10%
8W
225mm
160mm
(Length x Width)
X
About/
2 Kg
°
1-55 C
Warm white 4K color temperature/
4k
700mm
30mm
900mm
30mm
1s
3~8s
60s
8~60s
200436
2018

Advertisement

loading

Summary of Contents for Kohler BEAM K-23056T

  • Page 1 · · Do not apply spares that are not provided by Kohler, and please note that glass adhesive tape shall not be applied to the installation of Kohler spares. Kohler will not be responsible for any damage related to installation with spares not provided by Kohler.
  • Page 2 UNIT : mm M8 3 core female connector cable to conncet air pump 225 1.5 M8 2 core male connector cable to connect power Kohler reserves the right to change marked dimensions without prior notice. PACKAGING LIST PACKAGING LIST Material Description Material Description S/No.
  • Page 3 B: Faceplate Installation 1. After the transformer and the circuit are properly connected, the in wall tank is installed according to the installation instructions until the construction of the false wall in front of the water tank is completed. 2. When tighten four locknuts on support board, adjust to OPEN "OPEN"...
  • Page 4 7. The installation of pinch plate, the pinch plate installation provides another method for faceplate, that is, the faceplate don't rely on the position of the in wall tank and 7~20mm the mask, and can directly install the faceplate to the false 80mm X 136 wall.

This manual is also suitable for:

Beam k-23056tw