Advertisement
MULTI V
Modular Heat Pump
7. Electrical Wiring
7.2 DIP Switch Setting
7.2.1 Checking according to dip switch setting
You can check the setting values of the Master outdoor unit from the 7 segment LED.
The dip switch setting should be changed when the power is OFF.
7.2.2 Checking the setting of the Master unit
The number is sequentially appeared at the 7 segment in 5 seconds after applying the power. This number
represents the setting condition.
• Initial display order
Order
• Example) ARUN100LSS0
10
Note
1. Example of model names could be different with model names included within this PDB.
2. In accordance with the number of combined outdoor unit or target region, it could not be applied to set the
order
, .
CAUTION
Product may not properly operate if the relevant DIP switch is not properly setup.
18
No
4~12
1
2
38
46
22
1
5
6
2
Mean
Model capacity
Cooling only
Heat pump
380V
460V
220V
Standard / Corrosion Resistance
Cold temperature area
Tropical
38
Installation Guide
1
Advertisement
