Installation; Specifications - Fame Audio USB Vocal Kit Manual

Installation:

Always check the device for damage before use. Use the original packaging or suitable transport
or storage packaging to protect the product optimally from influences such as dust or moisture,
etc. when not in use.
Note!
The following points should be observed to avoid serious problems or damage.
 To prevent damage to the sensitive microphone capsule, never remove the
microphone grille.
 Never pull or plug-in the cable during operation.
 Dropping the microphone can cause serious damage to both the interior and
the housing.

The microphone should be stored safely after each use / placed in the
transport packaging.

Please use only slightly damp cloths for cleaning.
 Only clean the microphone when it is not connected / in use.
 Liquids of any kind should be kept away from the product. The penetration of
liquid can cause serious damage to the technology.
 Observe the specified sound pressure level/noise level spacing to prevent
damage to the diaphragm caused by extreme levels.
 Avoid feedback by keeping the microphone away from activated speakers that
are simultaneously monitoring the signal. If necessary, switch off the speakers
completely.
Hint!
Feedback can cause enormous damage to loudspeaker membranes.

Specifications:

Model
Sound conversion principle
Polar pattern
Frequency range
Sensitivity
Sampling Rate
Max. SPL
Required connector
FAME Audio USB Vocal Kit
USB condenser microphone
Cardioid
30 Hz – 18 kHz
-32 dB (0 dB = 1V/Pa@1kHz)
16 Bit / 48kHz
140 dB (@1kHz = 1% T.H.D.)
USB (supplied)
ENGLISH