Advertisement

Quick Links

ENGLISH
Important safety instructions! Please read before connection!
DANGER! (Electrical shock due to high voltages in the device)
The housing must not be removed! There are no parts to be maintained in the device.
Inside the unit there are components which are under high electrical voltage.
Before each use, check the device for damage or the absence of components, protective
devices or housing parts. If this is the case, the device must not be used!
Leave maintenance and repair work to a qualified service workshop or contact your
dealer. In the case of a malfunction of the device, operation must also be stopped
immediately until the device has been repaired by a specialist!
DANGER! (Electric shock due to short circuit)
Modifications to the power cord or plug are prohibited. If the power cord is damaged in any
way, it must be replaced immediately with an original spare part from the manufacturer.
Always make sure that the grounding of the device is maintained. Use only the supplied
power cords and always maintain the side grounded contacts. Make sure that the sockets
used have a properly functioning protective earth.
Failure to do so may result in fire or death due to electric shock!
DANGER! (For babies and children)
Dispose of or store any packaging material properly! Packaging material must be kept out
of the reach of babies and children due to the risk of suffocation.
Ensure that children never use the appliance unattended! In addition, make sure that
children do not remove (small) parts from the device, as they could suffocate by swallowing
parts!
Hint! (Fire hazard due to overheating)
The maximum permissible ambient temperature of this device is 40°C.
Ensure that the unit is placed in a well-ventilated location away from direct heat sources,
naked flames, combustible materials, and liquids. A minimum distance of 1 m is required.
Do not tape or cover the ventilation slots of the unit, or insert objects into the unit.
Hint! (Operating conditions)
In advance, it must be clarified with the manufacturer whether the device is also suitable
for indoor use. (PI20)
Never expose the device to direct rain, moisture or liquids, as this can lead to damage.
Vibrations, dust or sunlight can also cause damage, avoid them!

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MS Pro 38D-S and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Fame Audio MS Pro 38D-S

  • Page 1 ENGLISH Important safety instructions! Please read before connection! DANGER! (Electrical shock due to high voltages in the device) The housing must not be removed! There are no parts to be maintained in the device. Inside the unit there are components which are under high electrical voltage. Before each use, check the device for damage or the absence of components, protective devices or housing parts.
  • Page 2 ENGLISH Hint! (Condensation) To avoid condensation in the unit, the unit should adapt to the ambient temperature before commissioning. Hint! (Unwanted odours) A new product can sometimes lead to unwanted odours. This reaction is normal and disappears after a few minutes. Hint! (Damage to the loudspeaker membrane due to feedback) Avoid feedback by keeping the microphone away from activated loudspeakers that are used to listen to the signal at the same time.
  • Page 3: Intended Use

    Intended use: The product Fame Audio MS Pro 38D-S is optimized for use as a microphone. The device may only be used for this purpose and in accordance with the operating instructions. Other purposes as well as operation under other operating conditions are expressly not intended and can lead to damage to property or personal injury! No liability is assumed for damage resulting from improper use.
  • Page 4: Installation

    Equipment and use: This dynamic microphone has a three-pin XLR connector and is supplied with a suitable holder. Due to its characteristics the FAME Audio MS Pro 38D-S is used for vocal and speech pickup. Set up: All connections of the device should be made before switching on. Only use high-quality and undamaged cables that are as short as possible for the connections.
  • Page 5 ENGLISH Polar characteristics: Microphones have one or more directional characteristics to achieve better results in recording sound, depending on the application. Sound arriving at the basket and capsule from certain angles can be cancelled, attenuated or not affected at all. How strong or weak these effects are depends on the microphone.
  • Page 6 ENGLISH FAME Audio MS Pro 38D-S - Hypercardioid characteristic:: The FAME Audio MS Pro 38D-S is characterized by its hypercardioid polar pattern, which offers a narrow recording angle and a higher shielding against ambient noise, but does not suppress rear sound as much as the cardioid pattern, so it is important to pay attention to the correct placement of stage monitors.
  • Page 7: Technical Data

    ENGLISH Technical data: Model MS Pro 38D-S Principle Dynamic Polar Pattern Hypercardioid Frequency 50 - 16000 Hz Sensitivity -56dB±3dB (0 dB=1 V/Pa at 1kHz) Impedance 19Ω±20% at 1KHz On/Off-Switch Troubleshooting: The following overview serves as an aid for quick troubleshooting. If you are unsure, contact the manufacturer, the dealer or the corresponding specialist personnel.
  • Page 8 ENGLISH Hint! (Adjustable characteristics) When taking pictures, pay attention to the adjustable characteristics and read the instructions in the manual. The adjustable low-cut filter also leads to a different recording result, as sub-bass frequencies are filtered out. If the specified corrections have not led to success, please contact our service staff. The contact details can be found at www.musicstore.de Cleaning: Regular cleaning of the device from impurities and dust increases the durability of the product.
  • Page 9: Environmental Protection

    ENGLISH Environmental protection: The company MUSIC STORE professional GmbH always strives to reduce the burden of packaging to a minimum. The use of environmentally friendly and recyclable materials is of fundamental importance to us. Please dispose of and recycle the packaging components after use properly. Disposal of packaging: Ensure that paper packaging, plastic materials, etc.
  • Page 10 ENGLISH Notes MS ID: PAH0021449-000 04/2020...

Table of Contents