Advertisement

Quick Links

ENGLISH
Important safety instructions! Please read before connection!
DANGER! (Electrical shock due to high voltages in the device)
The housing must not be removed! There are no parts to be maintained in the device.
Inside the unit there are components which are under high electrical voltage.
Before each use, check the device for damage or the absence of components, protective
devices or housing parts. If this is the case, the device must not be used!
Leave maintenance and repair work to a qualified service workshop or contact your
dealer. In the case of a malfunction of the device, operation must also be stopped
immediately until the device has been repaired by a specialist!
DANGER! (Electric shock due to short circuit)
Modifications to the power cord or plug are prohibited. If the power cord is damaged, it
must be replaced immediately with an original spare part from the manufacturer.
Always make sure that the grounding of the device is maintained. Only use the supplied
power cables and always maintain the earthed protective contacts on the side. Make sure
that the sockets used have a properly functioning protective earth.
Failure to do so may result in fire or death due to electric shock!
DANGER! (For babies and children)
Dispose of or store any packaging material properly! Packaging material must be kept out
of the reach of babies and children due to the risk of suffocation.
Ensure that children never use the appliance unattended! In addition, make sure that
children do not remove (small) parts from the device, as they could suffocate by swallowing
parts!
Hint! (Fire hazard due to overheating)
The maximum permissible ambient temperature of this device is 40°C.
Ensure that the unit is placed in a well-ventilated location away from direct heat sources,
naked flames, combustible materials, and liquids. A minimum distance of 1 m is required.
Do not tape or cover the ventilation slots of the unit, or insert objects into the unit.

Advertisement

Table of Contents
loading

Summary of Contents for Fame Audio Studio CO5

  • Page 1 ENGLISH Important safety instructions! Please read before connection! DANGER! (Electrical shock due to high voltages in the device) The housing must not be removed! There are no parts to be maintained in the device. Inside the unit there are components which are under high electrical voltage. Before each use, check the device for damage or the absence of components, protective devices or housing parts.
  • Page 2 ENGLISH Hint! (Operating conditions) Due to its structural characteristics, the device is designed for indoor operation (IP20). Never expose the unit to rain, moisture or liquids as this may cause damage. Vibrations, dust or sunlight can also cause damage, avoid them! Hint! (Power supply) This large diaphragm condenser microphone is operated with phantom power.
  • Page 3 ENGLISH Symbols on device and packaging: The lightning flash symbol warns the user of uninsulated voltages and the risk of electric shock The exclamation mark symbol draws the user’s attention to important maintains and operating instructions in the manual The lightning warns you of dangerous voltage accessible from the outside. A connection to any terminal marked with this symbol may only be made with a ready-made cable that complies with the manufacturer's recommendations or with cables installed by qualified personnel...
  • Page 4: Intended Use

    Intended use: The product FAME Audio Studio CO5 was designed for use as a microphone. The device may only be used for this purpose and in accordance with the operating instructions. Other purposes as well as operation under other operating conditions are expressly not intended and can lead to damage to property or personal injury! No liability is assumed for damage resulting from improper use.
  • Page 5: Installation

    Equipment and use: This large diaphragm condenser microphone has a three-pin XLR connector and comes with a matching bracket. Due to its characteristics, the FAME Audio Studio C05 is used for miking vocals, speech, guitar and percussion. Commissioning: All connections of the device should be made before switching on.
  • Page 6: Directional Characteristics

    FAME Audio Studio CO5 - Cardioid characteristic: The FAME Audio C05 features a cardioid characteristic that effectively cancels or attenuates sound coming from the rear (at 180° or below). This microphone is ideal for recording vocals, speech, guitar and percussion.
  • Page 7: Specifications

    ENGLISH Specifications: Model Studio CO5 Sound conversion principle FET Condenser Microphone Membrane size 1 inch large diaphragm, gold plated Directional characteristic Cardioid Frequency range 20 Hz – 20 kHz Field transmission factor 12 mV/Pa (at 1 kHz) Output impedance 250 Ohm...
  • Page 8 ENGLISH Cleaning: Regular cleaning of the device from dirt and dust increases the shelf life of the product. Always disconnect the device from the power supply before cleaning it! Never clean the appliance wet! A dry microfibre cloth is best. Ventilation grilles and openings should always be cleaned of dust and dirt.
  • Page 9 ENGLISH Notes MS ID: REC0008047-000 02/2019...

This manual is also suitable for:

Rec0008047-000

Table of Contents