How To Use Washer - LG WD-12580BD Owner's Manual

H ow to use washer
1. Power ( )
• Use this button to turn the Power On/Off.
2. Cycles
• Rotate the Cycle selector knob to select
cycle designed for different types of fabric and
soil levels.
• Each cycle has a preset Water Temperature,
Spin Speed, Soil Level, and Option
(See page 13).
• The preset settings can be changed anytime
before Start.
NOTE: This front load washer requires longer
cycle time and gets clothes much cleaner,
yet is more gentle on the fabrics, than top
load washers. Washing time can be
reduced significantly for small loads or
lightly soiled loads by selecting Speed
Wash cycle and setting the Soil Level
button at Light.
3. Start/Pause (
• Use this button to start/stop the washer.
NOTE: If you do not press the
within 4 minutes of selecting a cycle, the
washer automatically turns off.
14
)
Start/Pause button
4. Delay Wash
• Allows the start of any cycle to be delayed for
1~12 hours.
• Choose the wash cycle for your load, and
then press the Delay Wash button once for
one hour or press the button again to increase
the delay wash time up to 12 hours in one
hour increments.
5. Water Plus
• Adds extra water to the wash and rinse
cycles for superior results.
6. SPINSENSE TM
• SPINSENSE TM can be used when there is a
vibration problem, especially on wood floor
installations.
• To operate SPINSENSE
Water Plus button for 3 seconds when the
washing machine is running on any cycle.
• When SPINSENSE TM
Spin Speed button light will blink on and off
continually to indicate that the SPINSENSE
function has been selected.
• Push and hold the Water Plus button again for
3 seconds to cancel SPINSENSE
• Once SPINSENSE TM
continue to function even if interrupted by a
power failure.
• 'SPINSENSE' option cannot be selected
during the spinning cycle.
7. Extra Rinse
• This option provides an additional rinse.
• Use this option to ensure the removal of
detergent or bleach residue from garments.
press and hold the
TM
has been selected, the
TM .
has been selected, if will
TM