Philips PHILISHAVE COOL SKIN Manual page 6

EnglisH
8
2 2
1 1
2 2
1 1
Inserting cartridges
1 When you start using a new set of cartridges,
take the pump out of its bag and push it into
a cartridge until it locks into position with a
click.
2 Move the release slide downwards and open
the cover of the cartridge compartment.
3 Slide the cartridge with the pump into the
shaver. It only fits properly if the white side of
the pump is pointing upwards.
4 Close the cover (you will hear a click).
5 Press the yellow pump button a few times
until the NIVEA FOR MEN shaving gel/lotion
appears. The shaver is now ready for use.
Replacing cartridges
Do not throw the pump away when you replace
an empty cartridge. You will need it for the other
cartridges.
1 Move the release slide downwards and open
the cover of the cartridge compartment.
2 Remove the empty cartridge and pull out the
pump.