System Requirements; Product Setup - D-Link DUB-E100 Quick Installation Manual

SySTEm
REQUIREmENTS
rEQUIrEMEntS
• Computer with Microsoft Windows
• Available USB port
• At least 32 MB of memory

PRODUCT SETUP

drIVEr InStaLLatIOn
This driver installation process is for Windows 7, Vista, and XP. It might vary slightly for older
®
Windows operating systems. To install DUB-E100 on a Mac or Linux system, please refer to the
DUB-E100 user manual on the Installation CD.
Windows 7, Vista, and XP
Step 1:
Insert the Installation CD into the CD drive. The DUB-E100 user interface menu screen will appear.
Click on Install to begin the DUB-E100 driver installation. The InstallShield Wizard will appear and
complete the installation.
Note: If the user interface does not start up, please browse to the Autorun folder in your
PC's CD drive and open Autorun manually.
Step 2:
Once you have completed the driver installation, please continue to Hardware Installation on page 4.
dUB-E100
® ®
7, Vista , XP (Service Pack 2), or 2000; Mac OS; or Linux
3