Table of Contents
Advertisement
Available languages
Available languages
GB
Summary
1 Upper grip handle
2 Start handle
3 On/off switch lighting (not visible)
4 Lighting
5 Upper selector rod with handle
6 2 butterfly nuts, screws and
washers for securing the top grip
bar
7 Central bar
8 2 cable holders
9 Bottom selector rod
10 Bottom bar
11 Machine housing
12 2 butterfly nuts, screws and
washers for securing the central
bar
13 2 wheels
14 Snow shovel edge
15 Auger (turbine)
16 Ejector chute
17 Carry handle
18 Butterfly nut for adjusting the de-
flector flap (not visible)
19 Deflector flap
20 Mains connection cable
21 Device cable
22 Plastic shroud with opening for
selector rod
23 Cable strain relief
24 Release button
25 Operating display (not visible)
26 4 cross-head screws for mount-
ing the ejector chute
27 Shift linkage fastening screw
28 6-part rubber rim
46
Function Description
The electric snow thrower is fitted with a
powerful induction motor with overload
protection, an auger with a rubber rim for
picking up snow, a robust plastic housing
and an adjustable ejector chute for throw-
ing out the snow.
The machine also has a light to make it
easier to work in poor light in the morning
or evening.
For the function of the operating parts,
please refer to the descriptions below.
Technical Specifications
Electric Lawnmower
Rated voltage
............... 220-240 V~, 50 Hz
Rated power input
Protection class
....................................II
Protection type
.................................... IP24
Idling speed
................................2900 min
Working width ....................................46 cm
Working height ..................................27 cm
Adjustment range of the ejector
deflector................................................. 60°
Ejector chute slewing range ................ 190°
Weight
.............................................15.5 kg
Sound pressure specification
(L
) ...................83.8 dB(A), K
pA
Noise level specification
guaranteed
............................. 100 dB(A)
measured
... 97.7 dB(A), K
Vibration (a
) ............... 2.8 m/s
h
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration of
conformity.
Technical and optical changes can be car-
ried out in the course of further develop-
ment without notice. All dimensions, refer-
ences and information of this instruction
manual are therefore without guarantee.
............. ESF 2046 L
.......................... 2000 W
=3 dB(A)
pA
(L
)
WA
= 2.26 dB(A)
WA
, K=1.5 m/s
2
-1
2
Advertisement
Chapters
Table of Contents
